LEE-BED webinar series starting Nov 3d

Publicerad: 20 October 2020

Dear Colleagues and Stakeholders,

We are delighted to invite you to take part in a free, interactive Webinar Series on Tuesday 3rd November, 10th November, 17th November & 24th November at 14.00 (CEST).

About the webinar:

In this series of webinars, we will introduce printed electronics and how the industry can benefit from this field in the future. In the first webinar, we will introduce the LEE-BED concept, how you gain access and which services we provide, from technical assessment, LCA, patent mapping and more. We will show you how your company can go from a business idea, to getting access to state-of-the-art research and technology infrastructure through our LEE-BED partners that best matches your requirements.

Webinar 2-4 will introduce the three categories of pilot line infrastructures accessible through LEE-BED. Webinar 2 will show you our nanomaterial pilot lines for both rapid development of novel materials, as well as upscaling these to pilot production.

Webinar 3 will show you our formulation pilot lines, from robotic high throughput screening and pilot production of inks, adhesives and composites.

Finally, in webinar 4, our component pilot lines will present our state-of-the-art technologies such as digital prototyping and high volume printing and mounting technologies, 3D multi-material printing, just to name a few.


Webinar 1 – How to become part of the future with printed electronic Webinar 2 – Nanomaterial pilot lines Webinar 3 – Formulation pilot lines Webinar 4 – Component pilot lines
November 3 November 10 November 17 November 24
  • LEE-BED concept
  • The Single Entry Point
  • LEE-BED services
  • Technical assessment
  • Life cycle analysis
  • Safety & regulation issues
  • Business modeling
  • Patent analysis
  • High throughput development line
  • Supercritical flow pilot lines
  • Solvothermal batch pilot lines
  • Gas phase material generator
  • High throughput screening line
  • Nano enabled ink pilot lines
  • Nano enabled adhesive pilot lines
  • Nano enabled composite pilot lines
  • R2R digital ink-jet printing pilot lines
  • 3D multi-material printing pilot line
  • R2R SMD pilot line
  • Smart packaging pilot lines



To learn more about printed electronics and LEE-BED, please register for free to our webinars held on November 3rd, November 10th, November 17th & November 24th. The first 3 webinars will have a duration of 1 hour, while the last webinar will approximately be around 1,5 hours. The webinars will start at 14:00 Central European Time.


Webinar sign up:

If you would like to attend, please click below

Register here  


For more information, email Zachary J. Davis or Nina Ritter Nielsen

We look forward to seeing you!

Stay safe and healthy!

With kind regards,

Zachary J. Davis & Nina Ritter Nielsen, Danish Technological Institute

LEE-BED is an open innovation test bed (OITB), which has been funded by Horizon 2020. The aim of the project is to form a sustainable OITB, which can service European industry within the field of embedded and printed electronics. This innovation center contributes to facilities to a European project focused on researching lightweight embedded electronics (LEE). LEE-BED can help your company to accelerates the development of sensor and electronic component in application such as automotive, IoT, construction, wearable and electronic health. This should help companies eliminate barriers to market through a full service establish by the LEE-BED consortium.